Print Settings
Temperature, bed adhesion, speed, fan, and retraction recommendations by material.
About Xiaozhuzi
Reliable filament for practical makers.
xiaozhuzi is built around a simple promise: stable materials, useful colors, and clear guidance so creators can move from idea to part without guesswork.
01
Controlled Diameter
Consistent flow and predictable walls across long prints.
02
Material Fit
PLA, PETG, TPU, and specialty finishes for real applications.
03
Clear Guidance
Settings, storage tips, and application advice after purchase.
Quick Help
Start with the most common support paths.
Material Guide
Compare PLA, PETG, ABS, TPU, ASA, and specialty materials by finish and use case.
Order Support
Shipping, returns, bulk inquiries, replacement support, and damaged-spool claims.
Material Settings
Recommended starting profiles
Use these as first-pass values, then tune for your printer, nozzle, and part geometry.
| Material | Nozzle | Bed | Fan | Best for |
|---|---|---|---|---|
| PLA Pro | 200-220 C | 45-60 C | 80-100% | Prototypes |
| PETG Tough | 235-250 C | 70-85 C | 30-50% | Functional parts |
| TPU Flex | 220-240 C | 40-60 C | 20-40% | Flexible parts |
| ABS Pro | 240-260 C | 90-110 C | 0-20% | Heat resistance |
Troubleshooting
Fast diagnosis path
1
Check moisture
Popping, bubbles, rough texture, and weak walls often mean the spool needs drying.
2
Tune temperature
Stringing usually improves with a lower nozzle temperature and correct retraction.
3
Confirm adhesion
Warping and lifted corners need a clean bed, correct surface, and controlled cooling.
FAQ
Common questions
Why is my filament popping during extrusion?
Moisture is the most common cause. Dry the spool, then store it sealed with desiccant.
Which material should I use for functional parts?
PETG is a strong everyday choice. TPU fits flexible parts. ABS and ASA fit heat-resistant applications.
How do I reduce stringing?
Lower nozzle temperature slightly, tune retraction, and confirm the spool is dry.
Can I request one color batch for a larger project?
Yes. Add a batch note during checkout or contact support before ordering multiple spools.
Support Request